FLAX
For further information concerning our complete range, please contact us.
COMPOSITE MECHANICAL CHARACTERISTICS (1)
(after processing by press moulding and tested at ambient temperature)
(1) Technical datasheet available on demand.
Mechanical property data developed in accordance with standard ISO specifications.
Relative values shown are accurate to the best of our knowledge, but should not be used for design purposes since absolute values can be influenced by processing conditions.
IDENTIFICATION
Example : LINCORE® PLA FF P2 40 400 150
| PLA : PLA MATRIX | P2 : Plain 2/2 | 40 : Flax content in weight (%) |
| FF : Flax Fabrics | T2 : Twill 2/2 | 400 : Nominal weight (g/m2) |
| P1 : Plain 1/1 | UD : Unidirectionnal | 150 : Width (cm) |
RECOMPENSE : EOLIEN
PRODUCT DESCRIPTION
LINCORE® PLA FF is a fabric made of LINCORE® roving (commingled flax and PLA filaments).
Consolidation is done by heating above melting temperature of PLA matric (170°C-200°C) and applying a low pressure (1-30 bars), before a cooling step under pressure.
The moulding can be realized by :
diaphragm (1 to 8 bars)- Thermo compression (10 to 200 bars) - Sandwich thermo compression (1 to 5 bars).
PRODUCT APPLICATIONS
LINCORE® PLA FF is mainly used for the following applications :
Automotive, Marine, Trucks, Sports & Leisure, Building, Urban & Industrial Parts, Energy.
|
FEATURES
|
PRODUCT BENEFITS
|
| FAST PROCESSING CYCLE TIME | NO VOC EMISSION |
| WEIGHT SAVING | EASE OF STORAGE CONDITIONS |
| LOW PRESSURE MOULDING | RECYCLABILITY |
| 100% GREEN MATERIAL | DRAPABILITY |
AVAILABLE PRODUCTS
|
Style
|
Standard width (mm) |
Weave
|
Roving (tex)
|
Weight ht (g/m2) |
Colour Warp/Weft |
| LINCORE® PLA FF | 1000 to 1500 | lain 1/1, Plain 2/2, Twill 2/2, UD 0°and UD 90° | 200/1000 | 153 to 750 | Natural |
|
| Plain 2/2 LINCORE® PLA FF P2 40 400 | ||||
| Flax fibre | Type | Long | |||
| TENSILE | Strength | ISO 527 | MPa | 99.5 | +/- 8.2 |
| Modulus
| GPa | 13.7 | +/- 0.4 | ||
| Elongation
| % | 1.4 | +/-0.1 | ||
| FLEXURAL | Strength | ISO 14125 | MPa | 125.8 | +/- 6.1 |
| Modulus
| GPa | 12.6 | +/- 0.9 | ||
| Flax content | In weight | % | 40 | ||
PLA FLAX FABRICS
CONTACT
Davy DURIATTI & Sébastien GUERET
E-Mail : groupe.depestele@gmail.com
